As to our locker lock,we have below 2 versions:

ⅰ.Standard Version:

1.Encoding Method Of Unlocking Card:
(1).How to encode master card:press reset button for clear the previous encoding memory.Read any blank card,then it will be encoded as master card.
(2).How to encode/cancel user card:read master card 2 times,then you can encode or cancel the user card. Read the pre-encode card 1 time:
①.If the pre-encode card is not encoded as user card before,it will be encoded as user card.The chord will send out when encoding succeed.
②.If the pre-encode card has been encoded as user card before,it will be cancelled as blank card other than user card.The chord will send out when cancelling succeed.
(3).Cancel all user cards:by read master card 3times continuously.
2.Unlock Method:
Unlock by master card/user card.Be aware of unlocking by master card to avoid entering into the below encoding step:
①.log into encoding/cancel user card step. (Read master card 2 times)
②.log into cancel all user card step. (Read master card 3 times)
3.Auto-lock Function:
Once the oblique lockpin insert into the mortise for 3s when close the locker,auto-lock will be available.
4.Alarm Function:
(1).Low-power alarm:If work voltage lower than 2.7v,chord will send out when unlock the locker.The remained power is enough for 200times unlocking after first chord sending out.In this case,the battery should be replaced.When the inside battery exhausted,use the urgent battery(9V) to connect the outside panel instead.
(2).Alarm against error operation:after 3times unlock continuously by un-encoded card,the lock will alarm by acute voice and be in void work for 1minute against any unlock operation.
(3).Alarm against theft:alarm by acute voice when break open by outside force.
5.About Power:
This model use 3pcs 1.5Voltage(AA) alkalescent battery.

 

ⅱ.New Version:

1.Card Required:Mifare-1 card.

(1).One lock:only encoded one master card,one user card.

(2).Setting master card:encoding master card by reset button.

2.Encoding master card:by reset button,same as the standard version.

3.Encoding user card:

(1).Make lock in open status.

(2)Use any blank card to read the lock,the lock will be closed.Then this card is encoded as the unique user card.The previous user card will be invalidity.After this encoding,only this new user card and master card can open the lock.

4.Unlocking Limitation:

(1).Lock closed by user card:can be opened by master card or user card.

(2).Lock closed by master card:can be opened only by master card,while this time cannot be unlocked by user card.

5.Unlocking way.

(1).Read master card to open/close the lock.

(2).Read user card to open/close the lock.

6.Notice:

(1).Master card cancelled by reset button.

(2).It’s better to set only one same master card for the whole locker project.

(3).After encoding the master card,the lock better in open status.